×16mm Reinforced Type A 23.5r25 Truck Mining Tire Chains
×16mm Reinforced Type A 23.5r25 Truck Mining Tire Chains - Image 2
×16mm Reinforced Type A 23.5r25 Truck Mining Tire Chains - Image 3
Reinforced

×16mm Reinforced Type A 23.5r25 Truck Mining Tire Chains

  • Precision Forging Process
  • Quenching+Tempering Treatment
  • Dynamic Balance Test – Each set of chains undergoes high-speed rotation testing to ensure smooth and vibration free driving after installation.
  • Rust Proof Coating Technology – surface zinc nickel alloy coating, corrosion-resistant, extends service life.
Category:

Description

How to put chains on tires:

  1. Spread out the chain,with the lozenge of forgings downwards,The tension chain mustbe on the outer side of the wheel.
  2. Drive onto the chain,stop at a distance of approx.2 ft(60cm)from the end,put themounting chain over the tire.Fix the mounting chain with the 2 mounting hooks.
  3. Slowly drive a full turn of the wheel.
  4. Stop the wheel and fasten the two ends with the assembly pliers
  5. Fasten the links of the outer chain with the pin-shackle,Open the mounting chain andremove the 2 mounting hooks.
  6. Fasten and secure all forgings on the inner chain side with connecting ring.Continueto fasten the chain.
  7. Secure connecting ring: push in the locking piece,drive in the pin;Secure pin-shacklepush in the fixing element and drive in the pins.
  8. Remove the mounting chain.Secure the tension lever,thus tightening the tension chain.Then push the locking plate into the tension chain and fasten.At last fasten tension chainends with a shackle.

Related products